Makita XGT Brushless 28mm SDS-Plus Rotary Hammer (Tool Only) 40Vmax HR003GZ01


    The 40V max XGT® Brushless 28mm AVT® Rotary Hammer (HR003GZ01, tool only) is a cordless concrete solution designed for heavy-load applications. It delivers the power, speed, and run-time for corded demands, without the cord. XGT technology delivers up to 135 of 9.525 mm holes per charge when using one 40V max XGT 4.0Ah Battery (sold separately).

    The Makita-built brushless motor delivers a full 2.8 joules of impact energy, with 0-980 RPM and 0-5,000 BPM. Constant speed control automatically applies additional power under load for optimum performance.

    The HR003GZ01 features Active Feedback-Sensing Technology (AFT®), which electronically turns off the motor if rotation of bit is suddenly forced to stop, and Anti-Vibration Technology (AVT®) for reduced vibration. More than just a padded handle, AVT is an internal counterbalance that uses air pressure to move counterweight pistons in the opposite direction of the drive piston to actively reduce vibration. In addition, the vibration-absorbing back handle and side handle further reduce vibration. For added durability in harsh job site conditions, Extreme Protection Technology (XPT™) is engineered for improved dust and water resistance.

    The rotary hammer has dust extraction capability with an on-board HEPA dust extractor attachment (sold separately) or standalone with Auto-Start Wireless System (AWS®). AWS uses Bluetooth® technology for wireless power-on and power-off communication between the equipped tool and dust extractor. Once connected via AWS, the AWS-equipped dust extractor will automatically power on or off when the AWS-equipped cordless tool starts or stops, running only when the tool is in use. This increases productivity on a single charge and reduces continuous noise at the job or work site.

    The torque limiting clutch is engineered to prevent gear damage by automatically disengaging the gears if the bit binds, and constant speed control automatically adds power to the motor to maintain speed under load to complete the most demanding jobs. Additional performance features include an electric brake, variable speed dial, built-in L.E.D. light, and a retractable tool hook.

    It is ideal for a range of trades including mechanical/electrical/plumbing contractors, concrete contractors, road and bridge contractors, utility workers, pest control, maintenance operations, and more. It accepts SDS-PLUS bits.

    XGT® is a system of equipment, tools, batteries, and chargers utilizing 40V max lithium-ion batteries. XGT® is engineered to deliver high power to take on high-demand applications, allowing users to completely transition to a cordless job site. XGT® is equipped with advanced brushless motor engineering, intelligent digital communication, and superior durability features to outpower, outsmart and outlast the rest.

    This is a bare tool - battery and charger are not included.

    • Low power consumption thanks to brushless motor
    • Impact drilling, non-impact drilling and spike function
    • Compatible with the DX12 Dust Extractor System (sold separately)
    • AVT (Anti-Vibration Technology) ensures extra-low vibration performance
    • Battery protection circuit protects against overloading, over-discharging and over-heating
    • Constant speed control automatically applies additional power to the motor to maintain speed under load to complete the most challenging jobs
    • XPT (Extreme Protection Technology) is engineered for improved dust and water resistance for operation in harsh job site conditions


    • Tool Weight: 3.9 kg
    • Impact Energy: 2.8 J
    • Battery Chemistry: Li-ion
    • No Load Speed: 0-980 rpm
    • Nominal Battery Voltage: 40 V
    • Impacts Per Minute: 0-5000 ipm
    • Max. Drilling Diameter in Steel: 13 mm
    • Max. Drilling Diameter in Wood: 32 mm
    • Max. Drilling Diameter in Concrete: 28 mm
    • Drilling Diameter with TCT Core Bit; 54 mm
    • Tool Dimensions (L x W x H): 358 x 102 x 238 mm
    • Optimum Drilling Diameter Range in Concrete: 10-18 mm


    (1) HR003GZ01 XGT 40Vmax SDS-Plus Rotary Hammer body
    • (1) Depth Gauge (331886-4)
    • (1) Cleaning Cloth (443122-7)
    • (1) MakPac Case Type 4 (821552-6)
    • (1) MakPac Inner Tray Type 4 (835E79-0)
    • (1) Grease Vessel Set, 100ml (194683-7)

    Supplied in a recyclable carton

  4. #VIDEO#

Express Shipping

Once orders are processed they are despatched
on a next working day delivery service.
( Highland & Offshore 2-3 Day Service)

Secure Payment

Credit & Debit Cards or BACS Payments

Customer Service

Contact us: 01733 343 031

Delivery within 1-2 working days - Prices include VAT @ 20%
£ 332.95
(Code: HR003GZ01)
In Stock

Delivery within 1-2 working days - Prices include VAT @ 20%

Free Delivery on orders over £100 to GB excluding Highlands & Offshore Islands

1 hour delivery window

Additional information


Follow us on social media
Call Us: 01733 343 031
We're Here to Help
Mon to Fri 8:30 am to 4:30 pm
(trade counter 8am to 4.30pm)
Saturday 8:30 am to 12 noon
Site Operated by: CBS Power Tools Ltd,
VP Square, Storeys Bar Road,
Fengate, Peterborough, Cambridgeshire, PE1 5TQ 
T: 01733 343031 
Receive all our news, promotions and benefit from exceptional offers
Subscribe to our newsletter.